SR1SN DR1SN Collection
1 Wire Hydraulic Hose. At Tasmanian Hose Solutions, we have quality options to cover nearly every application:
- Koman Smooth Cover - 3/16" (4.8mm)
- Continental Wrapped Cover - 1/4" (6.4mm) to 1" (25.4mm)
- Continental High Temperature Wrapped Cover - 1/2" (12.7mm) to 3/4" (19mm)
3/16" (4.8MM) KOMAN SMOOTH COVER SR1SN
PER METRE OR COIL - SAE 100R1AT HYDRAULIC HOSE
Size: 3/16" (4.8mm)
Koman SR1SN is our Quick Hitch or Tilt/Hitch hose of choice. It's economical, highly flexible and pliable and easy to install in tight areas.
Koman SR1SN meets or exceeds the performance requirements of: SAE 100R1AT EN 853 1SN. We supply this product per metre and in economical coil lengths. Alternatively, you can order your own custom-made hydraulic assemblies with this hose, be it for the commonly required quick hitch and tilt/hitch or any other medium pressure small bore flexible hose requirement.
CONSTRUCTION
Hose Tube: Oil resistant synthetic rubber
Reinforcement: One wire braid of high tensile steel braid
Cover: Abrazion, ozone, oil and weather resistant synthetic rubber
Applicable Specs: Meets or exceeds SAE 100R1AT / 1SN DIN EN 853
Operating Temperature: -40˚C to +100°C (hot air +70°C max.)
Compatible Fittings: TP Two Piece Crimp Couplings.
CONTINENTAL SR1SN – PER METRE OR COIL - SAE 100R1AT HYDRAULIC HOSE
Size Range: 1/4" (6.4mm) to 1" (25.4mm)
SR1SN is our most economical steel braided hydraulic hose, suitable for medium-pressure hydraulic applications including mobile, machine tool and agricultural applications, using petroleum or water based hydraulic fluids. SR1SN is cheaper, lighter and more pliable than our 'bread and butter' SR2SN 2 wire hose and is ideal for lower pressure hydraulic applications, diesel transfer and many more.
SR2SN meets or exceeds the performance requirements of: SAE 100R1AT EN 853 1SN Meets flame resistance USMSHA Designation Meets higher EN/DIN Pressures. We supply this product per metre and in economical coil lengths. Alternatively, you can easily order your own custom-made hydraulic assemblies with this hose in any of the sizes we stock. Continental S12SN can be purchased with our matched Continental B2 One Piece Crimp fittings, or alternatively our FA Field Attachable (Reusable) fittings, a simple DIY option for when you need to assemble a hose without a crimper or in the field without access to one.
CONSTRUCTION
Inner Tube: NBR (Nitrile)
Reinforcement: One braid of high-tensile steel wire
Cover: Black CR (Polychloroprene)
Temperature Range: -40°F to 212°F (-40°C to 100°C)
Compatible Fittings: Continental B2 One Piece Crimp Couplings (all sizes) & FA Field Attachable (Reusable) Fittings (sizes -04, 06, -08, -12 and -16).
CONTINENTAL DR1SN – PER METRE OR COIL - HIGH TEMP SAE 100R1AT HYDRAULIC HOSE
Size Range: 1/2" (12.7mm) to 1" (25.4mm)
DR1SN is our High Temperature version of our 1 wire SAE 100R1AT hydraulic hose for medium-pressure hydraulic oil lines used in mobile, machine tool and agricultural applications where higher temperature petroleum or water based hydraulic fluids are a factor.
DR1SN meets or exceeds the performance requirements of: SAE 100R1AT EN 853 1SN Meets flame resistance USMSHA Designation Meets higher EN/DIN Pressures SAE J1942/ U.S. Coast Guard. We supply this product per metre and in economical coil lengths. Alternatively, you can easily order your own custom-made hydraulic assemblies with this hose in any of the sizes we stock. Continental DR1SN can be purchased with our matched Continental B2 One Piece Crimp fittings.
CONSTRUCTION
Inner Tube: CPE (Chlorinated Polyethylene)
Reinforcement: One braid of high-tensile steel wire
Cover: Blue CPE (Chlorinated Polyethylene)
Temperature Range: -40°F to 302°F (-40°C to 150°C)
Compatible Fittings: Continental B2 One Piece Crimp Couplings (all sizes).
We stock DR1SN in sizes: -08, -10 and -12. DR2SN (2 wire) is stocked in -04, -06, -08 and -16 sizes.
Koman and Continental SR1SN/DR1SN are fully compatible and interchangeable with most SAE 100R1AT hose brands and types in the market. Ryco Slider T1S, Ryco Diehard T1D, Gates G1, Parker 421SN, Manuli Fluiconnecto Rockmaster 1SN, Pirtek R1AT, Total Rubber Sunflex HYD-R1T-SF-S, Exitflex EX1SN (EF253), Alfagomma Flexor 1SN. DR1SN is compatible and interchangeable with many High Temperature hose brands and types in the market, such as Ryco RQP1, Gates G1H, Parker 421SN High Temperature, Manuli Fluiconnecto EQUATOR/1, Eaton H190H WeatherBLAZE, Pirtek HT1, Exitflex EXH1SN Mad Max (EF291), Alfagomma 1SN EVOLUTION HT 150.
As we offer the complete engineered system of either Koman Hose with matched Two-Piece Fittings or Continental Hose with Continental crimp couplings, you’re buying a high-quality system that is designed to work together. We always recommend working with a matched system when it comes to hydraulic hose assemblies.